博科brocade300密碼重置方法
博科新款交換機silkworm 300已經開始慢慢上市了，今天拿到一臺給HP OEM的博科300交換機，惠普的型號是storageworks 8/8，24端口，激活8個端口。接下來是小編為大家收集的博科brocade300密碼重置方法，希望能幫到大家。
博科brocade300密碼重置方法
貼的標是惠普的，但是一看就知道是博科的東西，隨機的光盤就是博科的光盤。博科300的默認用戶名是admin，默認密碼是password。由于這臺機器用戶做過設置，密碼改過了需要重設一下。博科交換機是沒有reset按鈕的，必須通過console線連接通過命令重置。
博科300的os是用的linux 2.6的核心，最高權限的管理帳號是root。重置交換機密碼就是用這個帳號。
swd77 login: root
Password: fibranne
使用該帳號登陸后會出現下面的信息：
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
這里用Control-C結束就行了，如果回車會讓分別設置各個帳號的密碼，出現如下信息：
Warning: Access to the Root and Factory accounts may be required for
proper support of the switch. Please ensure the Root and Factory
passwords are documented in a secure location. Recovery of a lost Root
or Factory password will result in fabric downtime.
for user - root
Changing password for root
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - factory
Changing password for factory
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - admin
Changing password for admin
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - user
Changing password for user
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
登陸后是用passwddefault命令恢復出廠密碼
swd77:root> passwddefault
Password policies are already set to default.
All account passwords have been successfully set to factory default.
swd77:root>
看了“博科brocade300密碼重置方法”還想看：
博科brocade300密碼重置方法
